RATED 5.0 ON GOOGLE 327+ VERIFIED REVIEWS

SERVICE

Patio & Outdoor Concrete Coatings in Orange County

UV-stable polyaspartic systems for OC's outdoor entertainment surfaces.

5.0 · 327+ reviews · 18+ years in OC · Lifetime warranty

If you need a patio or outdoor concrete coating in Orange County, the only chemistry that survives our climate is polyaspartic. We coat patios, courtyards, walkways, BBQ surrounds, and outdoor kitchens with systems designed for direct sun, foot traffic, food spills, and OC's coastal humidity.

What's Included

Common Signs You Need This Service

Our Process - Step by Step

  1. Clean & degrease

    Remove BBQ grease, plant tannins, mildew.

  2. Crack & joint repair

    V-cut and fill cracks; rebuild expansion joints if degraded.

  3. Primer

    Polyaspartic primer for outdoor adhesion.

  4. Base coat

    Polyaspartic pigmented base.

  5. Decorative layer

    Full flake, partial flake, or solid color.

  6. UV top coat

    Two coats of polyaspartic UV-stable clear with anti-slip aggregate.

Material & Method Options

Solid Color Polyaspartic

Clean modern look. Easiest to maintain. Single base color.

Full-Flake Patio System

Most popular. Slip-resistant, hides imperfections, ties into pool deck if matching.

Stamped Concrete Restoration

We can re-color and re-seal stamped concrete that's lost its color or sealer integrity.

Pricing Factors

Typical range: Patio coatings in OC run $6–$11 per square foot installed depending on system selected.

Patio & Outdoor Concrete Coating - Local Context for Orange County

OC patios and courtyards see year-round use thanks to the climate, which means they wear faster than most outdoor surfaces nationally. We design our outdoor systems for 280+ days of direct UV exposure, daily foot traffic, and the inevitable wine-and-BBQ-grease cycle. Polyaspartic is the only chemistry that holds up - every other option will fail within 3–5 years in OC sun.

WHY ORANGE COUNTY CHOOSES US

Three Reasons Homeowners Pick Us Over the Other Guys

3,500+

FLOORS INSTALLED ACROSS OC

Since 2007 we've coated 3,500+ residential and commercial floors in all 34 Orange County cities. That volume gives our installers experience with every slab condition - coastal humidity, inland heat, mid-century concrete, and modern slabs alike.

<0.5%

DEFECT RATE

Our internal warranty data shows under 0.5% of installs require any callback in the first year. The industry average is roughly 2%. We get there with mandatory moisture-vapor testing on every slab and a full diamond-grind prep on every job - no shortcuts.

100%

USA-MADE COATINGS

Every resin, pigment, and aggregate we install is manufactured in the United States. We're certified installers for Penntek, Polyaspartic.com, and Citadel - three of the country's leading domestic coating manufacturers. No overseas resins; full chain-of-custody traceability.

WHAT ORANGE COUNTY SAYS

What OC Says About Our Patio

Transformative. Our 3-car garage looks like a high-end showroom. The crew arrived on time, kept the workspace clean, and finished the same day as promised. Hot-tire pickup was my biggest worry - zero issues 14 months in.

Daniel R. · Newport Beach · 3-Car Garage Polyaspartic

I had a failed DIY epoxy kit peeling everywhere. They diamond-ground it all off and laid down a beautiful full-flake floor. Two years later it still looks brand new. The 0% Wisetack financing made the upgrade easy.

Lisa M. · Mission Viejo · Full-Flake Garage

Coated our 14,000 sq ft commercial warehouse over a long weekend so we never lost a production day. Forklift traffic, oil drips, chemical spills - the floor just shrugs it all off and cleans with a mop.

Carlos H. · Santa Ana · Commercial Warehouse

Frequently Asked Questions - Patio

Can you match my indoor floor color?

Yes - we can color-match within polyaspartic systems. The outdoor surface will be slightly more matte due to the anti-slip aggregate, but the color reads identical.

Will plant pots stain the coating?

Polyaspartic resists tannin and acid stains from plants. We still recommend saucers under terra cotta pots.

What about furniture marks?

Polyaspartic is scratch-resistant up to 9H hardness. Standard patio furniture won't scratch it. Sliding heavy steel BBQ legs can leave marks - use furniture pads.

How long does install take?

Most patios are 1–2 days end to end. You can use the surface 24 hours after the final coat.

Related Services

POOL DECK

Cool-to-touch, slip-resistant flake systems engineered for OC's pool decks.

Learn more

DRIVEWAY

Heavy-duty polyaspartic systems for OC driveways - vehicle-rated, hot-tire-proof, UV-stable.

Learn more

STAINING

Acid and water-based stains that color the concrete itself - never peels, never flakes.

Learn more

RESURFACING

Crack chase, spall repair, pit fill, and slab prep - the foundation under every coating.

Learn more

GET YOUR FREE ESTIMATE TODAY - WE RESPOND WITHIN 2 HOURS

No on-site visit required for a same-day ballpark. Send your details and we'll call you back with a written quote.

GET YOUR FREE PATIO QUOTE TODAY

Written quote, free moisture test, no obligation. We come to you anywhere in Orange County.