Crack & Spall Repair (Standalone)
Repair-only service for clients who want to maintain a sealed concrete look.
SERVICE
Crack chase, spall repair, pit fill, and slab prep - the foundation under every coating.
If you need concrete resurfacing or repair in Orange County, we run a full prep program on every coating job: V-cut crack repair, polyurea filling, pit and spall patching, and diamond-grinding to ICRI specification. Most coating failures we're called in to redo were skipped on this step.
Map every crack, pit, and joint defect.
Diamond saw widens cracks for fill access.
Polyurea or polyurethane menders applied; cure in 15 minutes.
Polymer-modified patch material flush to slab.
Multi-pass grinding to remove old coating, level patches, achieve CSP.
Moisture vapor test before any coating is quoted.
Repair-only service for clients who want to maintain a sealed concrete look.
Repair, grind, and prime as part of a coating install.
For severely uneven slabs, a polymer self-leveling overlay restores a flat surface ready for coating.
Typical range: Repair-only work in OC runs $1.50–$4 per square foot depending on damage extent. Full prep is included in coating quotes.
OC's older concrete - pre-1990 garages, mid-century commercial slabs - frequently has cracks, pits, and spalling that surface-only coatings won't hide. Our prep program is the difference between a coating that lasts 20 years and one that fails in 18 months. We turn down jobs where the client wants to skip prep - it's not worth our warranty.
WHY ORANGE COUNTY CHOOSES US
3,500+
Since 2007 we've coated 3,500+ residential and commercial floors in all 34 Orange County cities. That volume gives our installers experience with every slab condition - coastal humidity, inland heat, mid-century concrete, and modern slabs alike.
<0.5%
Our internal warranty data shows under 0.5% of installs require any callback in the first year. The industry average is roughly 2%. We get there with mandatory moisture-vapor testing on every slab and a full diamond-grind prep on every job - no shortcuts.
100%
Every resin, pigment, and aggregate we install is manufactured in the United States. We're certified installers for Penntek, Polyaspartic.com, and Citadel - three of the country's leading domestic coating manufacturers. No overseas resins; full chain-of-custody traceability.
WHAT ORANGE COUNTY SAYS
Transformative. Our 3-car garage looks like a high-end showroom. The crew arrived on time, kept the workspace clean, and finished the same day as promised. Hot-tire pickup was my biggest worry - zero issues 14 months in.
Daniel R. · Newport Beach · 3-Car Garage Polyaspartic
I had a failed DIY epoxy kit peeling everywhere. They diamond-ground it all off and laid down a beautiful full-flake floor. Two years later it still looks brand new. The 0% Wisetack financing made the upgrade easy.
Lisa M. · Mission Viejo · Full-Flake Garage
Coated our 14,000 sq ft commercial warehouse over a long weekend so we never lost a production day. Forklift traffic, oil drips, chemical spills - the floor just shrugs it all off and cleans with a mop.
Carlos H. · Santa Ana · Commercial Warehouse
We V-cut and fill with polyurea, which cures harder than the surrounding concrete. The crack itself is gone - but new cracks can develop elsewhere if the slab is structurally compromised. We'll flag those issues during inspection.
Yes - we use self-leveling polymer overlays for severely uneven slabs. Adds cost but produces a perfectly flat surface ready for any coating.
Yes - diamond grinding removes any prior coating. We capture 99% of dust with HEPA vacs.
Coatings fail at the bond line, not in the coating itself. Bad prep = no bond = peeling. Industry data shows 80%+ of failed coatings traced to skipped prep steps.
The gold standard for OC residential garages. Oil-resistant, hot-tire proof, finished in a single day with a lifetime warranty.
Learn moreHeavy-duty polyaspartic systems for OC driveways - vehicle-rated, hot-tire-proof, UV-stable.
Learn moreDensified, diamond-polished concrete - minimalist, durable, low-maintenance.
Learn moreHeavy-build epoxy and polyaspartic for warehouses, manufacturing, and aerospace.
Learn moreNo on-site visit required for a same-day ballpark. Send your details and we'll call you back with a written quote.
Thanks! We'll call within 2 business hours.
Written quote, free moisture test, no obligation. We come to you anywhere in Orange County.